Appendix: Brug (Under Launcher-Kilde) For Firmware Version Før V01.00.19.00; Benq Launcher - BenQ EX600 Manual

Hide thumbs Also See for EX600:
Table of Contents

Advertisement

Available languages

Available languages

Appendix: Brug (under Launcher-kilde) for
firmware version før v01.00.19.00

BenQ Launcher

BenQ Launcher is the projector's operating system that allows you to wirelessly cast your device's
screen, play files, run apps, as well as adjust projector settings.
Use the remote control or connect a USB mouse to the projector's USB-1 or USB-2 ports to navigate BenQ
Launcher and operate its functions.
The BenQ Launcher home screen
Upon initial start up or when BenQ Launcher is selected in the input source menu, the projector will
display BenQ Launcher. If the projector is projecting from an input source (e.g. HDMI or PC), you
can return to BenQ Launcher mode by pressing the source button
on the remote control and then selecting BenQ Launcher in the input source menu.
When the Auto Source Search function is enabled in the Advanced > Settings menu of the projector's OSD
menu, the projector will display the BenQ Launcher home screen by default every time it is powered on. If the
Auto Source Search function is disabled, the projector will detect if a signal is available from the input source that
was last used and switch to that input source if it is available, if a signal is not available or the projector was set to
BenQ Launcher during the previous session, the projector will enter the BenQ Launcher home screen. See
Indstillinger on page
Actual screen may vary based on your BenQ Launcher firmware version.
The BenQ Launcher home screen features five main sections:
• Status Bar icons - Icons that display the time, Bluetooth, and wireless status.
• Wireless Projection buttons - Provides instructions on how to project wirelessly via iOS/Android
devices or a laptop/PC.
• Source menu - Allows you to select open media files from storage devices connected to the USB-1
or USB-2 ports, or video input source connected to the HDMI or PC ports for projection.
• App Shortcuts - Quick access to the pre-installed File Manager, BenQ Suggests, along with other
installed apps.
108 Appendix: Brug (under Launcher-kilde) for firmware version før v01.00.19.00
91.
or the LAUNCHER button

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ew600Eh600

Table of Contents