BenQ EX600 Manual page 111

4. Press the back button
Actual keyboard types may vary based on your language preference setting. See
information.
Switching to BenQ Launcher from an input source
When HDMI or PC is selected in the source menu, the projector will exit the BenQ Launcher
interface to project video from the input source (e.g. a Blu-Ray/DVD player, set-top box, or PC). The
projector will remain outside of the BenQ Launcher interface as long as the HDMI or PC input
source is selected or (depending on Auto Source Search settings) until the projector is powered off
and back on again.
As a result, anytime the user wants to wirelessly cast their device's screen, view media files stored on a
flash drive, or run apps, they must return to the BenQ Launcher interface. To return to BenQ
Launcher:
1. Press the source button
2. Select BenQ Launcher in the source menu.
When the Auto Source Search function is enabled in the Advanced > Settings menu of the projector's OSD
menu, the projector will display the BenQ Launcher home screen by default once it is powered on. If the Auto
Source Search function is disabled, the projector will detect if a signal is available from the input source that was
last used and switch to that input source if it is available, if a signal is not available or the projector was set to BenQ
Launcher during the previous session, the projector will enter the BenQ Launcher home screen. See
on page 91.
Wireless Connections
Connecting the projector to a wireless network
Before you can project wirelessly via the projector, you must first connect the projector to a wireless
network. To connect your projector to a wireless network, or to switch wireless networks:
If you have already connected the projector to a wireless network during the setup wizard you may skip the steps in
this section.
1. Install the provided wireless dongle into the wireless dongle port (see
dongle on page 8).
2. Power on the projector (see
at anytime to exit out of the keyboard.
or the LAUNCHER button on the remote control.
Start af projektoren on page
Appendix: Brug (under Launcher-kilde) for firmware version før v01.00.19.00
Keyboard on page 141
Installation af den trådløse
22).
for more
Indstillinger
111