144
Enhancing Productivity
Inserting and removing hard drives
As with USB ports, the i.LINK
Play (automatic configuration) and hot swapping (the ability
to connect and disconnect devices while the computer is on).
The main difference between i.LINK
that i.LINK
Inserting and removing hard drives
Your Satellite
Depending upon the original hard drive installed in your
computer, you may wish to increase storage capacity by
changing the internal drive, or you can add hard drive space
by inserting a drive into the select bay module.
To change the internal hard drive:
1
Shut down your computer completely using the Shut Down
command. See
2
Unplug the computer.
3
Close the display panel and remove any cables you may
have connected.
4
Turn the computer upside down.
5
Remove the screw on the hard drive cover.
Sample removing the hard drive cover screw
supports faster data transfer rates.
®
®
M35 can use various hard drive capacities.
"Powering down the computer" on page
port supports both Plug-and-
®
and USB technology is
®
93.