Table of Contents
Advertisement
Installing additional memory (optional)
6
Using a standard Phillips no. 1 screwdriver, unscrew the
captive screws that secure the memory module slot cover,
then remove the memory module slot cover.
Sample removing the memory module slot cover
7
Place the memory module slot cover in a safe place so
that you can retrieve it later.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its gold connector bar (on the side you insert into the
computer).
8
Remove the new memory module from its antistatic
packaging.
9
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the memory module into
the socket.
10
Gently press down on the memory module connector
until the clips snap into place.
Getting Started
57
Advertisement
Table of Contents
