98
Learning the Basics
Powering down the computer
Using Standby Mode
The Stand by puts the computer into a power-saving mode.
Stand by holds the current state of the computer in memory
so that, when you restart the computer, you can continue
working from where you left off.
Factors to consider when choosing Standby:
While in Stand by mode, the computer uses some battery
power. The battery will eventually discharge in Stand by
mode. If the battery discharges, your data will be lost if
you do not save your work before entering Stand by
mode.
Restarting from Stand by mode uses less time and battery
power than restarting from Turn Off or Hibernation
mode.
When starting up again, the computer returns to the mode
in which you left it, including all open programs and files
you were using.
To power down the computer using the Standby command,
click Start, Turn off computer, and select Stand By.
If you power down using the Stand by and the battery
discharges fully, your information will be lost. Be sure to save
your work first.