Inserting and removing hard drives
Depending upon the original hard drive installed in your computer,
you may wish to increase storage capacity. You may add hard
drive types based on those available for your computer. You can
also additional hard drive space by inserting a drive into the select
bay module.
To change the internal hard drive.
1
Shut down your computer completely using the Shut Down
command. See
page
2
Unplug the computer.
3
Close the display panel and remove any cables you may have
connected.
4
Turn the computer upside down.
5
Remove the screw on the hard drive cover.
Removing the hard drive cover screw
6
Lift the hard drive bay cover to expose the hard drive.
7
Grasp the plastic tab on the exposed edge of the hard drive
and pull it to remove the hard drive from the computer.
Connecting Other External Devices
Inserting and removing hard drives
"Powering down the computer" on
99.
69