Table of Contents
Advertisement
password, press the
. If no password is registered, press
Enter
reactivates and allows you to continue working.
If you are using the built-in screen, make sure the display
priority is not set for an external monitor. To do this, hold the
key and press
Fn
pops up. Hold the
through the display options.
If you are using an external monitor:
Check that the monitor is turned on.
Check that the monitor's power cable is firmly plugged
into a working power outlet.
Check that the cable connecting the external monitor to
the computer is firmly attached.
Try adjusting the contrast and brightness controls on the
external monitor.
Press
priority is not set for the built-in screen.
The screen does not look right.
You can change the display settings by clicking a blank area
of the desktop with the secondary control button, then
clicking Properties. This opens the Display Properties dialog
box. The Appearance tab of this dialog box allows you to
choose the colors for the screen. The Settings tab allows you
to choose the screen resolution.
The built-in screen flickers.
Some flickering is a normal result of the way the screen
produces colors. To reduce the amount of flickering, try using
fewer colors.
To change the number of colors displayed:
1
Point at the desktop and click with the secondary button.
2
Click Properties, and then the Settings tab.
Resolving a hardware conflict
Enter key
twice. A window with display choices
F5
key and press
Fn
and
simultaneously to make sure the display
Fn
F5
If Something Goes Wrong
, type the password, and press
twice again to advance
F5
183
. The screen
Enter
Advertisement
Table of Contents
