Using the DVD-ROM or multi-function drive
5
Hold the disc by its edges and check that it is clean and
free of dust.
Handle discs carefully. Avoid touching the surface of the disc.
Grasp it by its center hole and edge. If you handle the disc
incorrectly, you could lose data.
If the disc is dusty, clean it as described in
DVDs Discs" on page
6
Carefully place the disc in the empty tray with its label
facing up.
Sample positioning the disc in the drive
7
Gently press the disc onto the center spindle until you
feel it click into place.
Be careful not to touch the drive's lens (located underneath the
drive's spindle) or the area around it. Doing so could cause the
drive to malfunction.
8
Make sure the disc is completely on the spindle and is
lying flat on the tray.
Learning the Basics
89.
87
"Caring for CDs or