Download Print this page

Samsung iDCS 500 Manual page 28

Printed circuit cards
Hide thumbs Also See for iDCS 500:

Advertisement

3-27
SVMi-8
Note before installing this card it should be correctly configured with a hard disk drive and the
appropriate number of voice processing modules. One additional Voice Processing Module can be
added.
The SVMi-8 card is installed in any universal slot of any cabinet. Only one SVMi-8 can be installed in
a iDCS 500 system and it counts as eight (8) stations of the power supply rating. Check that the
cabinet power switch is in the OFF position. Next, position the SVMi-8 card in the grooves of the
card guide and gently slide the card in until it makes contact with the connector. Press gently but
firmly on the top and bottom of the front edge of the card until the card sits in its connector. Ensure
that you have installed the correct power supply.
Figure 3-21
SVMi-8 Card
Now go to Chapter 11, SVMi-8 Set Up of this manual.
NOTE: Do not insert this card with system power ON.

Advertisement

loading