Changing The Exposure And Original Image Type; Changing The Exposure And Original Image; Type - Sharp MX-M1100 Quick Start Manual

CHANGING THE EXPOSURE AND
ORIGINAL IMAGE TYPE
Exposure and original image type settings can be selected as appropriate for the original.
The procedure for darkening the exposure and setting the original image type to "Text/Prtd. Photo" is explained
below.
The side to be scanned
must be face up!
(2)
Scan Internet Fax Fax
Address Book
Original Scan: Auto
(1)
Address Entry
Exposure Auto Text
(3)
Send Settings Resolution 200X200dpi
Address Review File Format PDF
Colour Mode
File Auto/Greyscale
Special Modes
Quick File
When Fax/I-Fax address is included,
exposure setting shared among Fax/
I-Fax/ Scanner mode is selected.
Scan/Exposure
Auto
Original Image Type
Manual
(5) Text/
Text
Prtd.Photo
(7)
Printed
Photo
Photo
5
1 3
(6)
Moiré Reduction
1
2
Data Entry USB Mem. Scan
Send: Auto
A4
PDF
OK
(4)
OK
(8)
Text/Photo
Map
3
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
Select settings in the touch panel.
(1) Specify the destination.
For the procedures for specifying a destination, see
"CONVENIENT TRANSMISSION METHODS" (page
72).
(2) Make sure that the desired mode ([Scan] tab)
is selected.
(3) Touch the [Exposure] key.
(4) Read the displayed message and touch the
[OK] key.
(5) Touch the [Manual] key.
(6) Darken light colours with the
5 levels are available for the exposure. Darken light
originals with the
with the key.
(7) Touch the [Text/Prtd. Photo] key.
In Internet fax/fax mode, the original image type and
moire reduction cannot be selected.
(8) Touch the [OK] key.
Press the [START] key.
key.
key, and lighten dark originals
Cancel scanning
77