Manual Finishing - Sharp MX-M1100 Quick Start Manual

MANUAL FINISHING

Manual finishing can be used to staple or punch holes in paper that has been loaded in the inserter.
Copying and printing are not performed when the manual finishing function is used. As an example, manual
finishing can be used to staple paper on which printing or copying has already been performed and thereby create
booklets.
For detailed information, see "MANUAL FINISHING MODE" in the User's Guide.
Base screen
Touch the [MANUAL FINISHING] key in the touch panel to open the base screen of manual finishing mode.
Staple, punch, and folding settings are selected from the base screen.
(1)
(2)
(3)
(4)
(5)
(1) [Top Inserter Tray] key, [Bottom Inserter Tray] key
Select the tray in which you have loaded paper.
(2) [Top Tray] key
This sets the top tray of the finisher as the output tray.
(3) [Offset Tray] key
This sets the offset tray of the finisher as the output
tray.
(4) [Staple] key
Use this to staple the loaded paper. When this key is
touched, keys for selecting the stapling positions will
appear.
94
Set the output function.
Plain
A4
Plain
A4
Top Tray
Offset Tray
Staple
Fold
2 Hole
Punch
Saddle 3 Hole
Stitch Punch
(5) [Saddle Stitch] key
Use this to staple and fold the loaded paper at the
centreline.
(6) [Fold] key
Use this to fold the loaded paper in half.
(7) [2 Hole Punch] key, [3 Hole Punch] key
Use this to punch holes in the loaded paper.
(6)
(7)