Sharp MX-M1100 Quick Start Manual page 22

Bypass tray (MX-MFX1)
The maximum number of plain paper sheets that
can be loaded in the bypass tray is about 100.
When loading A3W, A3, B4 size paper, pull out the
tray extension.
Bypass tray (MX-MFX2)
Squeeze the lever that locks the guide, and
move the guide to the desired paper size.
Special types of paper that cannot be loaded in other trays can be loaded in the bypass tray.
For detailed information on the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" in the
User's Guide.
20
Place paper that is A5 (7-1/4" x 10-1/2") or smaller
in the horizontal orientation.
The side to be
printed on must be
face up!
The maximum number of plain
paper sheets that can be loaded
in the bypass tray is about 500.
After loading paper, press the
tray button and make sure that
the paper rises.
To remove paper from the tray,
press this button, make sure
that the paper descends, and
then remove the paper.
When loading paper larger than
A4R or 8-1/2" x 11"R, pull out
the extension tray.
For details, see "Loading paper
in the bypass tray (MX-MFX2)"
in the User's Guide.
The side to be
printed on must
be face up!