Changing The Resolution - Sharp MX-M1100 Quick Start Manual

CHANGING THE RESOLUTION

You can select the resolution as appropriate for the original type.
Sending an image in scan mode
This section explains how to set the resolution to "300X300dpi", which creates a clearer image than the default
resolution.
The side to be scanned
must be face up!
(2)
Scan Internet Fax Fax
Address Book
Original Scan: Auto
Address Entry
Exposure Auto
(1)
Send Settings Resolution 200X200dpi
(3)
Address Review File Format PDF
Colour Mode Auto/Greyscale
File
Special Modes
Quick File
Scan/Resolution
100X100dpi
200X200dpi
300X300dpi
(4)
400X400dpi
600X600dpi
78
1
2
Data Entry USB Mem. Scan
Send: Auto
A4
Text
PDF
OK
(5)
3
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
Select settings in the touch panel.
(1) Specify the destination.
For the procedures for specifying a destination, see
"CONVENIENT TRANSMISSION METHODS" (page
72).
(2) Make sure that the desired mode ([Scan] tab)
is selected.
(3) Touch the [Resolution] key.
(4) Touch the [300X300dpi] key.
(5) Touch the [OK] key.
Press the [START] key.
Cancel scanning