Figure 30. Nim And Dim Installation - ADTRAN NetVanta 3000 Series Hardware Installation Manual

NetVanta 3000 Series Hardware Installation Guide
Step
1 Remove power from the unit.
2 Slide the option module into the option slot until the module is firmly seated against the chassis.
3 Secure the pins at both edges of the module.
4 Connect the cables to the associated device(s).
5 Restore power to the unit.
WAN-T1
WAN-DDS
61200860L1-34L
Instructions for Installing the NIMs
SLOT 1 NET/DBU
DSX-1 DBU
DBU

Figure 30. NIM and DIM Installation

Copyright © 2006 ADTRAN, Inc.
Action
ETH 0/1
CONSOLE
Unit Installation
12V
POWER
69