Figure 9. Netvanta 3205 (Dc Version) Rear Panel Layout - ADTRAN NetVanta 3000 Series Hardware Installation Manual

NetVanta 3000 Series Hardware Installation Guide

Figure 9. NetVanta 3205 (DC version) Rear Panel Layout

NetVanta 3205 Rear Panel Interfaces and LEDs
SLOT 1 NET/DBU Option Slot
The
SLOT 1 NET/DBU
modules are described in the section Option Modules on page 43.
10/100BaseT Ethernet Interface and Activity LEDs
The Ethernet port (
ETH 0/1
data traffic is being sent or received on the Ethernet port. The green link LED is on when the router has
a good connection to the LAN. The Ethernet port provides the following:
• 10BaseT or 100BaseT with a single connector
• Auto-negotiation
• CSMA/CD
• IEEE 802.3 compatibility
CONSOLE Interface
The interface is an EIA-232 serial port (DCE) which provides for local management and
CONSOLE
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
Power Connection
The rear panel has a power input for connection to the power supply. Power supplies are shipped with
final destinations in mind. For example, domestic routers are shipped with a wallmount supply and
international routers are shipped with a universal input lump-in-line supply with the appropriate
cables. All of the 1U-high products have universal power supplies and are shipped with the appropriate
cable. Please refer to Supplying Power to the Unit on page 66 for connection details.
61200860L1-34L
option slot supports various NIM plug-in option modules. These option
) is an RJ-45 connector with LEDs. The amber activity LED flashes when
Copyright © 2006 ADTRAN, Inc.
OVERVIEW
29