Network Interface Modules And Dial Backup Interface Modules Supported; Netvanta 3430 Shipping Contents - ADTRAN NetVanta 3000 Series Hardware Installation Manual

NetVanta 3000 Series Hardware Installation Guide

Network Interface Modules and Dial Backup Interface Modules Supported

The NetVanta 3430 supports a variety of interchangeable network interface modules (NIMs) and dial
backup interface modules (DIMs). The NIMs available for the NetVanta 3430 provide a variety of WAN
connectivity options including the following:
• 56K/64K (DDS)
• T1/FT1
• T1/FT1 + DSX-1
• Dual T1
• T1/FT1 NEBS
• E1/FE1
• E1/FE1 + G.703
• Serial (V.35/X.21/EIA 530)
• SHDSL
• ADSL, Annex A and Annex B
If needed, an analog modem, ISDN BRI (U and S/T) DIM, or Serial DIM can plug onto the NIM,
providing dial backup capability. Refer to Installing Dial Backup and Network Interface Modules on
page 68 for more details.

NetVanta 3430 Shipping Contents

Each NetVanta 3430 unit is shipped in its own cardboard shipping carton. Open each carton carefully, and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to Repair
and Return on page 9).
Domestic Shipping Contents
Shipments of the NetVanta 3430 domestic units include the following items:
• NetVanta 3430 base unit
• ADTRAN OS System Documentation CD
• Quick Start Guide
• Warranty card
• NetVanta 3000 Series support card
• 4 rubber mounting feet
• Power cord
61200860L1-34L Copyright © 2006 ADTRAN, Inc.
OVERVIEW
35