IBM PS/2 90 XP 486 Hardware Maintenance Reference page 78

14.6 1030 Hard Disk Drive
Cover (1005)
Disconnect any cables necessary for removal.
Notes:
1. The last drive on the cable requires a terminator.
Cables" on page 15.4 for cable information.
2. Load the IML image onto the replacement default drive.
information, see "IML, POST, and BIOS" in topic 2.3.3.
3. If the drive you are replacing has a motor-start jumper installed,
transfer the jumper to the replacement drive.
see "Motor-Start Jumper" in topic 3.3.4.
IBM PS/2 Model 90 XP 486 and 95 XP 486 HMR
1030 Hard Disk Drive
For more information
PICTURE 18
¦ Copyright IBM Corp. 1990, 1992
14.6 - 1
See "Internal
For more