IBM PS/2 90 XP 486 Hardware Maintenance Reference page 30

2.5.2 Changing the System Configuration
An alternate method of resolving memory-address conflicts is to change the
address of the conflicting hardware option by using Change configuration
from the Set configuration program.
identify the addresses used by the EMS driver.
addresses that do not conflict.
Note: These conflicts can occur because the automatic configuration
program sets up only the hardware.
operating system or application requirements.
configuration after changing an address, the addresses you changed
will be set back to their default values.
IBM PS/2 Model 90 XP 486 and 95 XP 486 HMR
Changing the System Configuration
Before changing adapter addresses,
Then set the adapter to
It does not consider the
¦ Copyright IBM Corp. 1990, 1992
2.5.2 - 1
If you run automatic