Table of Contents
Advertisement
7.2.3 Operations
Some of the ASCII terminal operations are listed below.
Communication
When using an ASCII terminal, the communication parameters
will appear on the information panel (for example 96-8N1).
This information is not an error message.
Configuration
When you run the system programs or diagnostic programs
from the ASCII terminal, the terminal values might change.
Check the terminal values.
them.
Utilities
To start the system programs when using an ASCII terminal,
follow the instructions that came with the operating
system.
the screen, press Ctrl+i.
Diagnostics
When an ASCII terminal is selected as the system console,
the following will not appear on the diagnostic installed
device list:
Keyboard
Mouse
System board async port
Video displays.
IBM PS/2 Model 90 XP 486 and 95 XP 486 HMR
Operations
If they have changed, reset
When the cursor moves to the top-right corner of
¦ Copyright IBM Corp. 1990, 1992
7.2.3 - 1
Advertisement
Table of Contents
