Life Fitness CLUB Series Assembly Instructions Manual page 17

5
STEP 15:
• Carefully route the CABLE around the pulley as shown. Make sure the CABLE is in the groove of the pulley.
• SECURELY assemble the 4-1/2" PULLEY (39) to the vertical pulley bracket on the BACK PIVOT (5) using two RH CAPS (28), one
3/8 X 1-3/4" BOLTS (13), two 3/8" RH WASHERS (23), and one 3/8" LOW HEIGHT LOCK NUT (21).as shown in FIGURE 15.
STEP 16:
• Carefully route the CABLE around the pulley as shown. Make sure the CABLE is in the groove of the pulley.
• SECURELY assemble the 4-1/2" PULLEY (39) to the vertical pulley bracket on the TOWER (1) using two RH CAPS (28), one
3/8 X 1-3/4" BOLTS (13), two 3/8" RH WASHERS (23), and one 3/8" LOW HEIGHT LOCK NUT (21).as shown in FIGURE
16.
1
CABLE
17
21
39
3/8 X 1-3/4" 13
FIGURE 15
FIGURE 16
CABLE
21
23
3/8 X 1-3/4" 13
28
23
28
39