Life Fitness CLUB Series Assembly Instructions Manual page 11

FIGURE 8
5
21 28
3
23
30
22
2
3/8 X 2-3/4" 15
STEP 8
:
• SECURELY assemble the HANDLES (3) to the BACK PIVOT (5) using four RH CAPS (28), two 3/8 X 2-3/4" BOLTS (15),
four 3/8" SAE WASHERS (22), four 3/8" RH WASHERS (23) and two 3/8" LOW HEIGHT LOCK NUTS (21) as shown in
FIGURE 8. (NOTE: Before tightening bolts, push HANDLES (3) down until the bolts are at the top of the slots in
plate.)
• Assemble one RUBBER BUMPER (30) to the BASE FRAME (2) where the HANDLES (3) contacts the BASE FRAME (2).
11