Technical Specifications - Johnson Controls FCP-NA-701-L User Manual

Technical specifications

Table 10: FCP non-programmable and programmable FCU or PTAC Thermostats technical
specifications
Specification
Models
Power requirements
Output rating Valve and fan
outputs
Analog inputs Remote sensor 10K ohm at 77°F (25°C) NTC sensor
Pipe sensor
Set back
Local temperature sensor type
Remote temperature sensor
type
Wire size
Temperature Heat mode
adjustment
Cool mode
range
Accuracy Local
temperature
sensor
Remote
temperature
sensor
Remote pipe
sensor
Deadband
Ambient Operating
conditions
Storage
Disconnection means
Pollution degree
Rated impulse voltage
Automatic Action
Ratings for supply and loading
26
Description
Non-programmable: FCP-NA-701-L
Programmable: FCP-PA-701-L
20 VAC to 30 VAC, 60 Hz, max. 3 A (3 VA at 24 V nominal)
1 A maximum per each relay channel
(Max. relays ON combination: 3 relays), 20 VAC to 30 VAC
10K ohm at 77°F (25°C) NTC sensor
NC/NO dry contact switch
NTC temperature sensor, accurate to ±1°F (±0.6°C) at 77°F (25°C)
NTC temperature sensor, accurate to ±2°F (±1.2°C) at 70°F (21°C)
16 AWG (100 ft [30.5 m] maximum) to 24 AWG (36 ft [11 m]
maximum)
45°F to 90°F (7°C to 32°C)
60°F to 95°F (15°C to 35°C)
±1°F (±0.6°C)
±2°F (±1.2°C) at 70°F (21°C)
±5°F (±3.0°C)
2°F to 5°F (1°C to 3°C)
14°F to 122°F (-10°C to 50°C); 5% RH to 90% RH, noncondensing
-4°F to 140°F (-20°C to 60°C); 5% RH to 90% RH, noncondensing
Type 1B
2
330 V
100,000 cycles
20 VAC to 30 VAC
FCP Non-Programmable and Programmable Fan Coil or PTAC Thermostat Largo User Guide