Accessing The Programmable Mode Menu; Setting The Time Of Day And Date; Setting A Schedule; Default Schedule - Johnson Controls FCP-NA-701-L User Manual

Accessing the programmable mode menu

To access the programmable mode, complete the following steps:
Press Mode to set the thermostat to OFF mode.
1.
2. Press and hold Mode and Up for 5 seconds.

Setting the time of day and date

About this task: You must manually set the time and date and the thermostat automatically sets
the day once you set the date. The clock is set by default in a 12 hour format. You can adjust the
clock to a 24 hour format. If the time is not set, the clock flashes. The date displays in year, month,
day format.
The following list shows the default values of the time and date.
• Time: 12:00 PM
• Date: 2019, 01, 01
To set the time and date, complete the following steps:
1. With the thermostat in OFF mode, press and hold Mode and Up for 5 seconds to enter the
programmable mode menu.
2. Select the clock and press Mode.
3. Press Mode to scroll through the menu and press Up or Down to change the options.
After each change, press Mode to confirm the change.
4.

Setting a schedule

To set a schedule, complete the following steps:
1. With the thermostat in OFF mode, press and hold Mode and Up for 5 seconds to enter the
programmable mode menu.
Press Up or Down to navigate to the heat icon, then press Mode to access the menu.
2.
3. Press Up or Down to select the day of the week you want to schedule, then press Mode to
confirm the selection.
Press Mode to navigate to the following setting and press Up or Down to set the required
4.
period and temperature. Repeat this step until you set all the schedule settings.
5. Press Mode to save the settings and return to Set Schedule menu.
Press Up or Down to navigate to the cool icon and press Mode to access the menu.
6.
7. Repeat Step 3 and Step 4 until you set all the schedule settings.

Default schedule

The default schedule functions as the starting point when you program your personal schedule.
The following table shows the default schedule.
FCP Non-Programmable and Programmable Fan Coil or PTAC Thermostat Largo User Guide 19