Operating The Appliance; Switching On The Appliance; Switching Off And Disconnecting The Appliance; Switching Button Lock On Or Off - Siemens iQ700 KF 86N Series Installation Instructions And Instructions For Use

Operating the appliance

en
Frozen food container
You can remove the container:
Pull out the freezer compartment as far as it will go.
1.
Lift the container and remove.
2.
Ice cube tray
You can make ice cubes:
Fill the ice cube tray 3/4 full with water and place in
1.
the freezer compartment.
If the ice cube tray is stuck to the freezer com-
Note:
partment, loosen with a blunt implement only (e.g.
spoon handle).
To loosen the ice cubes, twist the ice cube tray
2.
slightly or hold briefly under flowing water.
38
1 Operating the appliance
S witching on the appliance
O p e r a t i n g t h e a p p l i a n c e
Insert mains plug in a socket.
1.
Wait until the refrigerator compartment, cool-fresh
2.
compartment and freezer compartment displays light
up.
The appliance begins to cool.
Adjust the required temperatures in the refrigerator
3.
compartment, cool-fresh compartment and freezer
compartment.
~ "Setting the temperature" on page 39
Operating tips
After the appliance has been switched on, it may
■
take several hours until the set temperatures have
been reached. Do not put in any food until the selec-
ted temperature has been reached.
The fully automatic NoFrost system ensures that
■
the freezer compartment remains free of ice.
Defrosting is not required.
The sides of the housing are partly heated slightly.
■
This prevents condensation in the area of the door
seal.
Switching off and disconnecting the appli-
ance
Switching off the appliance
Pull out the mains plug or switch off the fuse.
■
Shutting down the appliance
If you do not use the appliance for a prolonged period:
Pull out the mains plug or switch off the fuse.
1.
The appliance no longer cools.
Clean the appliance.
2.
Leave the appliance open.
3.

Switching button lock on or off

The button lock protects the appliance from
unintentional operation.
Press and hold lock button for 3 seconds.
■
The button lock is switched on when the lock button
lights up.When the button lock is switched off, the
temperature displays light up.

Setting the temperature unit

You can choose between the unit ° C and ° F:
Press settings button.
1.
Press °C/°F button.
2.
Cool-fresh compartment temperature display shows
tP.
Press N/M button freezer compartment repeatedly
3.
until the freezer compartment temperature display
shows °C or °F.
Press settings button.
4.
The setting is saved.