Switch Unit And Coin Meter; Test Menu - Sega Let's Go Island Owner's Manual

9-1 SWITCH UNIT AND COIN METER.

The SWITCH UNIT and COUNTERS are housed within the COINTOWER. To access these controls you will need
to open the COIN door, the switches and counters can be found directly on the rear face of the Tower.
9
DEVICE
TEST BUTTON
SERVICE BUTTON
COIN IN COUNTER
VOLUME CONTROL

9-2 TEST MENU

The details of changes to Test Mode settings are saved when you exit from each
Test Mode by selecting EXIT. Be careful because if the power is turned off before
that point, changes to the settings will be lost.
SYSTEM TEST MODE can be used to check the information or the operation of RINGWIDE, adjust Monitor color, and
perform coin/credit settings.
1
Press the TEST Button after powering on the unit to display the following SYSTEM TEST MODE.
For further details, see the RINGWIDE service manaul. If you do not have a RINGWIDE service manual with this product,
there is a copy available for download on the SEGA AMUSEMENTS website. (www.segaarcade.com)
42
EXCEL CREDIT BD
TEST BUTTON
SERVICE BUTTON
Press to enter TEST MODE - Also used to enter choices selected within
TEST MODE
Press for SERVICE CREDIT - Also used to scroll through TEST MENUs
Counts inserted coins (£0.10 or $0.10 = 1 count)
Adjusts audio level
COIN COUNTER
VOLUME CONTROL
FUNCTION