Fixation To Site - Sega Let's Go Island Owner's Manual

6-4

FIXATION TO SITE

• Make sure that all the adjusters contact the floor. Otherwise the cabinet could
move, causing an accident.
• Provide a ventilation space at least 15cm wide behind the cabinet. There are
ventilation holes on the back of the cabinet. Do not block the ventilation holes.
Doing so could trap heat inside resulting in fire. It could also result in equipment
damage or cause parts to become exhausted prematurely.
• Do not position the product on uneven surfaces or a surface which slopes.
Positioning the cabinet on either an uneven or sloped surface may cause the
cabinet to become unstable which may result in damage or injury.
The product comes with castors attached to 8 locations. When the installation sire has been determined, have the ad-
justers come in direct contact with the floor. Establish a gap of approximately 5mm between the floor and the castor
and adjust the unit so that it will remain level.
ADJUSTER (2)
ADJUSTER (2)
CASTOR (8)
ADJUSTER (2)
ADJUSTER (2)
6
27