Installing The Floor - Sega Let's Go Island Owner's Manual

6-2

INSTALLING THE FLOOR

1
Place the floor [DV-0002UK] into the space between the two cabinets, taking note of orientation.
Secure into position using the JOINT SASH REAR [DV-0004UK] and secure using M4x14 SKT BH
BLK [029-B00416-0B] (4), M4 WSHR BLK 16OD [068-441616-0B] (4) and M4 WSHR SRNG BLK
[060-S00400-0B] (4)
JOINT FLOOR (DV-0002UK)
2
Fit both JOINT SASH SIDE L [DV-0008UK] and JOINT SASH SIDE R [DV-0009UK] to the outer sides of
the floor and secure using M4x25 SKT CAP CRM [020-000425-0C] (3) and M4 WSHR FLT CRM 16OD
[068-441616-0C] (3)
JOINT SASH SIDE R
Secure into position using M4x25 SKT CAP CRM (3) [020-000425-0C] and M4 WSHR FLT CRM 16OD (4) [068-441616-0C]
JOINT SASH REAR (DV-0004UK)
Secure into position using M4x14 SKT BH BLK
[029-B00416-0B] (4)
JOINT SASH SIDE L
6
23