Samsung VP-DX10 User Manual page 40

before recording
Note on use
• Samsung is not responsible for data loss due to misuse.
• We recommend using a memory card case to avoid losing data from moving and static electricity.
• After a period of use, the memory card may become warm. This is normal, not a malfunction.
• Photo image files recorded on a memory card by your DVD camcorder conform to the "DCF (Design rule for
Camera File system)" universal standard established by the JEITA (Japan Electronics and Information Technology
Industries Association).
• DCF is an integrated image-file format for digital cameras: image files can be used on all digital devices conforming
to DCF.
The DVD camcorder supports SDHC and MMCplus memory cards for data storage.
The data storage speed may differ, according to the manufacturer and production system.
- SLC (single-level cell) system: faster write speed is enabled.
- MLC (multi-level cell) system: only lower write speed is supported.
For best results, we recommend using a memory card that supports faster write speed.
Using a lower write speed memory card for recording a movie may cause difficulties with storing the movie on the
memory card. You may even lose your movie data during the recording.
In an attempt to preserve any bit of the recorded movie, the DVD camcorder forcibly stores the movie on the
memory card and displays a warning: "Card Error (Low Speed Card)."
If you are unavoidably using a low speed memory card, lower the recording quality by one level "Fine," "Normal."
You have three quality options to record a movie with the DVD camcorder : "Super Fine," "Fine," "Normal."
However, the higher the quality, the more memory that will be used.
34_ English