Samsung VP-DX10 User Manual page 116

troubleshooting
Symptom
An afterimage remains on the LCD
screen.
The image on the LCD screen
looks dark.
Discs
Symptom
The disc cannot be removed.
Disc is not recognised and the
disc cover opens.
Recording
Symptom
Pressing the Recording Start/
Stop button does not start
recording.
The actual recording time is less
than the estimated recording time.
110_ English
Explanation/Solution
• This occurs if you disconnect the AC power adaptor or remove the battery pack
before turning the power off
• Ambient light is too bright. Adjust the brightness and angle of LCD.
• Use LCD enhancer function.
Explanation/Solution
• The internal temperature of your camcorder is unusually high. Turn off your
camcorder and leave it for a while in a cool and dry place.
• Your camcorder is damp and moist inside (condensation). Turn off your camcorder
and leave it for about 1 hour in a cool and dry place. page 108
• Finalising is interrupted by turning off your camcorder. Turn on your camcorder and
remove the disc only when the finalisation is completed. pages 87-88
• The disc is damaged. Replace with a new disc.
Explanation/Solution
• Press the MODE button to set Movie (
• There is not enough free space to record on the built-in memory, DVD disc,
or memory card.
• Check if memory card is not inserted or write-protect tab is set to lock.
• Your camcorder is damp and moist inside (condensation). Turn off your camcorder
and leave it for about 1 hour in a cool, dry place. page 108
• The estimated recording time is calculated by some references.
• When you record an object that moves fast, the actual recording time may be
shortened.
).