Recording Movie Images - Samsung VP-DX10 User Manual

recording
Basic procedures to record a movie or photo image are described below and on the
following pages.

RECORDING MOVIE IMAGES

• You can record movie images in the Movie mode only. page 21
• You can record movie images using the remote control. page 13
• This DVD camcorder provides two Recording start/stop buttons. One is on the
rear side of the camcorder and the other is on the front side of the camcorder.
Select the Recording start/stop button that works best for you.
1. Turn the DVD camcorder on.
• Connect a power source to the DVD camcorder. (A battery pack or an AC
power adaptor)
• Slide the POWER switch downwards to turn the DVD camcorder on.
• Set the appropriate storage media. page 31
- If you want to record on a memory card, insert the memory card.
- If you want to record on a DVD disc, insert a DVD disc.
- When you insert a DVD disc or a memory card in STBY mode, the
torage media setup menu appears.
2. Check the subject on the LCD screen. (Lens and LCD)
• Set the Lens open/close switch to open ( ). page 10
3. Press the Recording start/stop button.
• The (  ) recording indicator will display, and recording will start.
• Press the Recording start/stop button again to stop recording.
4. When recording is finished, turn the DVD camcorder off.
60
STBY 00:00:00 [95Min]
Mi n
60
00:00:10 [95Min]

Mi n
English _39 English _39