Samsung VP-DX10 User Manual page 24

preparation
Charging the battery pack
• Use IA-BP85SW battery pack only.
• The battery pack may be charged a little at the time of
purchase.
1. Slide the POWER switch downwards to turn off the
power.
2. Open the LCD screen and attach the battery pack to
the DVD camcorder. page 16
3. Open the DC IN /USB jack cover.
4. Connect the AC power adaptor to the DC IN jack of
your DVD camcorder.
5. Connect the AC power adaptor to a wall socket.
• The ACCESS/CHG (charging) indicator lights up in
orange and charging starts.
The ACCESS/CHG (charging) indicator lights up in
green when the battery is fully charged.
6. Once charged, disconnect the AC power adaptor from
the DC IN jack on your DVD camcorder.
• Even with the power switched off, the battery pack will still discharge if it is left attached to the DVD camcorder. It is
recommended that you remove the battery pack from the DVD camcorder.
Charging indicator
The colour of the ACCESS/CHG (charging) indicator indicates the power or charging state.
- If the battery has been fully charged, the charging indicator is green.
- If you are charging the battery, the colour of the charging indicator is orange.
- If an error occurs while the battery pack in charging, the charging indicator blinks
orange.
18_ English
POWER switch