Bard QW Series Installation Instructions Manual page 50

THE FOLLOWING INFORMATION IS NEEDED
TO CHECK PERFORMANCE OF UNIT
FLUID SIDE DATA
9. Entering fluid temperature
10. Leaving fluid temperature
11. Entering fluid pressure
12. Leaving fluid pressure
13. Pressure drop through coil
14. Gallons per minute through the water coil
15. Liquid or discharge line pressure
16. Suction line pressure
17. Voltage at compressor (unit running)
18. Amperage draw at line side of contactor
19. Amperage at compressor common terminal
20. * Suction line temperature 6" from compressor
21. * Superheat at compressor
22. * Liquid line temperature at metering device
23. * Coil subcooling
INDOOR SIDE DATA
24. Dry bulb temperature at air entering indoor coil
25. Wet bulb temperature of air entering indoor coil
26. Dry bulb temperature of air leaving indoor coil
27. Wet bulb temperature of air leaving indoor coil
28. * Supply air static pressure (packaged unit)
29. * Return air static pressure (packaged unit)
30. Other information about installation
** When performing a heating test insure that second stage heat is not activated.
* Items that are optional
Manual 2100-532G
Page 48 of 48
Manual 2100-577C
Page 50 of 50
Cooling ** Heating
Cooling ** Heating
F
F
PSIG
PSIG
PSIG
GPM
PSIG
PSIG
V
A
A
F
F
F
F
F
F
F
F
WC
WC