Technical Features And Ambient Conditions; Directives And Standards - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Description of the motor

2.3 Technical features and ambient conditions

2.3 Technical features and ambient conditions
2.3.1

Directives and standards

Standards that are complied with
SIMOTICS S, SIMOTICS M, SIMOTICS L, SIMOTICS T, SIMOTICS A motors –
subsequently called the "SIMOTICS motor series " – comply with the following standards:
● EN 60034-1 – Rotating electrical machines – Dimensioning and operating behavior
● EN 60204-1 – Safety of machinery – Electrical equipment of machines; general
requirements
Where applicable, the SIMOTICS motor series are in conformance with the following parts of
IEC / EN 60034:
Feature
Degree of protection
Cooling
Type of construction
Connection designations
Noise levels
Temperature monitoring
Vibration severity levels
Standard component, e.g. cannot be applied to built-in motors
1)
Relevant directives
The following directives are relevant for SIMOTICS motors.
European Low-Voltage Directive
SIMOTICS motors comply with the Low-Voltage Directive 2014/35/EU.
European Machinery Directive
SIMOTICS motors do not fall within the area of validity covered by the Machinery Directive.
However, the use of the products in a typical machine application has been fully assessed
for compliance with the main regulations in this directive concerning health and safety.
28
1)
1)
1)
Standard
IEC / EN 60034-5
IEC / EN 60034-6
IEC / EN 60034-7
IEC / EN 60034-8
IEC / EN 60034-9
IEC / EN 60034-11
IEC / EN 60034-14
Naturally cooled 1FW6 built-in torque motors
Configuration Manual, 07/2017, 6SN1197-0AE01-0BP3