Technical Features - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Description of the motor
2.3 Technical features and ambient conditions
2.3.3

Technical features

Note
The values specified in the following table only apply in conjunction with the system
prerequisites described in "System integration".
Table 2- 1
Technical feature
Motor type
Type of construction
Degree of protection according to
EN 60034-5
Cooling method
Thermal motor protection
Temperature monitoring
2nd rating plate
insulating material class of stator
winding according to EN 60034-1
Impulse withstand voltage insula-
tion class according to
EN 60034-18-41
(IEC 60034-18-41)
Magnet material
Connection, electrical
Motor feeder cables
34
Standard version of the naturally cooled built-in 1FW6 torque motor
Version
Synchronous motor with permanent magnet rotor – with a high
number of poles
(Number of rotor poles 22 or 30)
Individual components: stator, rotor
Motor: IP23
The final degree of protection (minimum degree of protection:
IP54) of the built-in motor must be realized by the machine man-
ufacturer.
Natural cooling
1 x PTC triplet with response threshold +130 °C
(acc. to DIN 44081/44082)
Evaluation via Sensor Module: SME120/SME125/TM120
(see SINAMICS S120 Manual)
1FW6xxx-xxxxx-xxx1:
with 1 x KTY 84 (acc. to EN 60034-11)
1FW6xxx-xxxxx-xxx3:
with 1 x Pt1000 (acc. to EN 60751)
Evaluation via Sensor Modules: SME120/SME125/TM120
(see SINAMICS S120 Manual)
Enclosed separately
Temperature class 155 (F)
IVIC: C
Rare earth material
Cable outlet:
axial or tangential
Connection type:
Permanently connected power and signal cables with open core
ends
Length: 2 m or
permanently connected power and signal cables
pre-assembled with connectors
Length: 0.5 m
For the specifications of the motor feeder cables, see Chapter
"Requirements for the motor supply cables (Page 170)"
Naturally cooled 1FW6 built-in torque motors
Configuration Manual, 07/2017, 6SN1197-0AE01-0BP3