Technical Features And Ambient Conditions; Directives And Standards - Siemens SIMOTICS-T 1FW6053-B05-0F Operating Instructions Manual

2.2

Technical features and ambient conditions

2.2.1

Directives and standards

Standards that are complied with
SIMOTICS S, SIMOTICS M, SIMOTICS L, SIMOTICS T, SIMOTICS A motors –
subsequently called the "SIMOTICS motor series" – comply with the following standards:
● EN 60034-1 – Rotating electrical machines – Dimensioning and operating behavior
● EN 60204-1 – Safety of machinery – Electrical equipment of machines; general
requirements
Where applicable, the SIMOTICS motor series are in conformance with the following parts of
IEC / EN 60034:
Feature
Degree of protection
Cooling
Type of construction
Connection designations
Noise levels
Temperature monitoring
Vibration severity levels
Standard component, e.g. cannot be applied to built-in motors
1)
Relevant directives
The following directives are relevant for SIMOTICS motors.
European Low-Voltage Directive
SIMOTICS motors comply with the Low-Voltage Directive 2014/35/EU.
European Machinery Directive
SIMOTICS motors do not fall within the area of validity covered by the Machinery Directive.
However, the use of the products in a typical machine application has been fully assessed
for compliance with the main regulations in this directive concerning health and safety.
Naturally cooled 1FW6 built-in torque motors
Operating Instructions, 07/2017, 6SN1197-0AF02-0BP2
1)
1)
1)
2.2 Technical features and ambient conditions
Standard
IEC / EN 60034-5
IEC / EN 60034-6
IEC / EN 60034-7
IEC / EN 60034-8
IEC / EN 60034-9
IEC / EN 60034-11
IEC / EN 60034-14
Description
23