Cleaning And Maintenance - Dometic TBW203 Operating Manual

Cleaning and maintenance

7.2 Using the cooler
A
NOTICE!
Ensure that the objects placed in the cooler are suitable for cooling/
warming to the selected temperature.
I
NOTE
Like every refrigerator, your cooler must be properly ventilated so that
any heat created can dissipate, otherwise it cannot be guaranteed to
work properly.
➤ Switch on the cooler using the power switch (fig. 2 1, page 2).
✓ The red LED on the power switch lights up and the temperature inside the cooler
falls to 5 °C at most.
8 Cleaning and maintenance
!
WARNING!
Always disconnect the device from the power supply before you clean
and service it.
A
NOTICE! Risk of damage
• Never clean the cooler under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
8
TBW203
EN