BordBar TB08 Please read this operating manual carefully before starting the device. Keep it in a safe place for future reference. If the device is passed on to another person, this operating manual must be handed over to the user along with it.
Explanation of symbols BordBar TB08 Explanation of symbols DANGER! Safety instruction: Failure to observe this instruction will cause fatal or serious injury. WARNING! Safety instruction: Failure to observe this instruction can cause fatal or serious injury. CAUTION! Safety instruction: Failure to observe this instruction can lead to injury.
BordBar TB08 Safety instructions General safety DANGER! • On boats: If the appliance is powered by the mains, ensure that the power supply has a residual current circuit breaker. WARNING! • Do not operate the cooling appliance if it is visibly damaged.
Page 6
Safety instructions BordBar TB08 CAUTION! • Disconnect the cooling appliance from the mains – Before cleaning and maintenance – After use • Food may only be stored in its original packaging or in suitable containers. NOTICE! • Check that the voltage specification on the type plate is the same as that of the power supply.
Page 7
BordBar TB08 Safety instructions Operating the cooler safely DANGER! • Do not touch exposed cables with your bare hands. This applies especially when operating the device from the AC mains. CAUTION! • Before starting the device, ensure that the power supply line and the plug are dry.
Please check if the cooling capacity of the device is suitable for storing the food or medicine you wish to cool. Scope of delivery • BordBar TB08 cooler • Connection cable for DC connection • Fastening and carrying strap Technical description The cooler can chill products to a maximum of 20 °C below the ambient temperature...
BordBar TB08 Operation No. in Description fig. 1, page 8 Ventilation grilles DC socket connection LED COLD lights up green when the device is cooling Slide switch for the operating mode COLD: The device is cooling OFF: The device is switched off...
Page 10
Operation BordBar TB08 Fastening the cooler on the seat ➤ Place the cooler on a seat (passenger seat or the middle seat in the back). ➤ Thread the seat belt into one of the belt holders and fasten the cooler onto the passenger seat (fig.
Page 11
BordBar TB08 Operation Switching the device on and off ➤ Plug the DC connection cable (fig. 3 A) into the cigarette lighter socket in the vehicle. ➤ Push the slide switch into the required position. ✓ The cooler is switched on and starts cooling or heating the interior.
Cleaning and maintenance BordBar TB08 Cleaning and maintenance WARNING! Always disconnect the cooler from the mains before you clean and service it. NOTICE! Beware of damage • Never clean the cooler under running water or in dish water. • Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the cooling device.
BordBar TB08 Troubleshooting Troubleshooting Problem Possible cause Suggested remedy Your cooler is not No voltage is flowing The ignition must be switched on in most working and the fan from the cigarette vehicles to supply current to the cigarette wheel which can be lighter in your vehicle.
Disposal BordBar TB08 Disposal ➤ Place the packaging material in the appropriate recycling waste bins wherever possible. If you wish to finally dispose of the product, ask your local recycling centre or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.
Page 16
Dometic (Pty) Ltd. Dometic Branch Office Belgium MEXICO Regional Office Zincstraat 3 Dometic Mx, S. de R. L. de C. V. South Africa & Sub-Saharan Africa B-1500 Halle Circuito Médicos No. 6 Local 1 Unit 6-7 on Mastiff Linbro Park ...