Cleaning And Maintenance; Cleaning The Cooler - Dometic Adventuridge KB2015 User Manual

Taking the unit cover off and inserting it
To facilitate filling the cooler, you can completely remove the unit cover:
1. Disconnect the cooler from the power supply.
2. Store all power cords in the cord compartment
3. Fold the carrying handle
resting on the edge of the cooler
4. Open the unit cover so that it is at an approx. 30° angle.
5. Carefully pull the unit cover
You can now fill or empty the cooler.
Reverse the steps to insert the unit cover and insert the unit cover in the brackets
at an 30° angle.
Closing the cooler
1. Fill the cooler with the food and beverages to be cooled
2. To close the cooler, shut the unit cover
3. Push the carrying handle
If necessary, the cooler can now be connected to the power supply.

Cleaning and maintenance

Cleaning the cooler

WARNING!
Risk of electric shock!
When you clean the cooler with the power supply connected,
there is a risk of electric shock.
− Disconnect the cooler from the power supply each time
before you clean it.
NOTICE!
Risk of short circuit!
Liquids that have penetrated the inside of the unit cover may
cause a short-circuit.
− Make sure that no liquids penetrate the unit cover.
AFTER SALES SUPPORT
1 800 544 4881
USA
10
(see fig. E) all the way to the front until it is
12
.
1
out of the holders.
1
.
10
(see fig. E) all the way to the back.
customersupportcenter@dometicusa.com
Cleaning and maintenance
3
(see fig. A).
2
(see fig. A).
USA
17