Overview; Ink Discharge - Epson Stylus TX235 Service Manual

Color inkjet printer

Table of Contents

Epson Stylus SX230 series / SX235W series / SX430W series / SX440W series

5.1 Overview

This chapter provides the refurbishing work of the printer and its purpose.

Purpose

To clean the ink path inside the Printhead to restore its condition identical to the factory default.

Jigs

Required jigs and cleaning liquid for cleaning the ink path is as follows.

Shipping Liquid (CR06, 18kg)

Shipping Liquid (CR06, 1kg)

I/P, DPIC009BSP, 110, PRINTING

Operation of the Adjustment Program for refurbishment when performing the ink discharge

Ink discharge can be done by selecting and running "Ink Discharge" from the Adjustment Program for

refurbishment with the jig set on the printer.

At this point, the factory default values except the adjustment-related setting values are written on the EEPROM

on the Main Board of the printer. This is performed in order to erase the personal information including the

network settings and the operating information of the printer before refurbishment, etc.

This default value restoration is automatically done when performing the ink discharge by the Adjustment

Program for refurbishment automatically.

For the details of how to set the jigs for refurbishment and how to use the Adjustment

Program (for refurbishment), see guide in the Adjustment Program (for refurbishment).

Approximately three minutes and ten seconds are necessary for completing the Ink

Discharge.

Refurbishment

Name

Ink Supply Jig

CSIC Chip (Bk)

CSIC Chip (C)

CSIC Chip (M)

CSIC Chip (Y)

Table of Contents