Epson Stylus NX430 Small-in-One Quick Manual

Epson Stylus NX430
®
Small-in-One
™
Start Here
Read these instructions before using your product.
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials, including from inside the printer.
2
Turn on and adjust
1
Raise the paper support, then connect the power cord.
Caution: Do not connect to your computer yet.
2
Raise the control panel, then press the
To lower the control panel, squeeze the release bar
underneath and push the control panel down.
Caution: Do not lower the control panel without first squeezing the
release bar underneath or you may damage the product.
*412086500*
*412086500*
3
To select English as your language, press OK.
Note:
then press OK.
4
Note:
1
2
3
power button.
4

Select language

If you want to change the language, press

Install ink cartridges

Don't load paper yet.
Lift up the scanner, and wait until the ink cartridge holder
stops moving.
Shake the ink cartridges gently 4 or 5 times, then
unpack them.
Remove only the yellow tape from each cartridge.
Caution: Don't remove any other seals or the cartridges may leak.
Insert the cartridges in the holder for each color, and press
each cartridge down until it clicks.
or to select it,