Ricoh OP-P1 Service Training page 47

Updating Firmware - 2

To begin the update, click the [User Tools] tab, and then click [Printer Configuration].

Click [Printer Firmware Update].

Follow the procedure in the service manual.
 The manual explains what the machine displays during the update and after the
update has finished.
 The manual also explains what happens if the firmware update fails.

Do not cut the power, unplug the USB cable, or do any other operation during the
update.

After the update has finished:
 Cycle the main power off/ on to initialize the firmware.
 Print another Configuration Page and check it to make sure that the firmware was
updated.
Slide 47
Service Manual > 5. System Maintenance Reference >
47
OP-P1/MF1 Training
Firmware Update