Ricoh OP-P1 Service Training page 77

 The following steps are done for each sheet of paper:
 The charge roller [1] applies a charge to the photoconductive
 A developer/toner mixture from the toner supply unit [4] is picked
 The areas of the latent image on the drum (created by exposure to
Slide 77
No additional notes
AIO Operation (1)
surface of the drum [2].
up by the toner supply roller [5] and applied to the development
roller [6].
the laser beam) pick up toner from the development roller.
77
OP-P1/MF1 Training