The ADF roller (4) feeds the original into the ADF and
sends it down.
ADF sensor 2 (5) detects the leading and trailing edge of
each original as passes and continues to feed past the feed
roller (6).
If the leading and trailing edges of the paper do not pass
Slide 55
1. Original Feed Tray
2. Pick-up Roller
3. ADF Sensor 1
4. ADF Roller
5. ADF Sensor 2
6. Feed Roller
7. Scanning Glass (ADF originals)
8. CIS
9. Original Exit Roller
10. Original Output Tray
ADF – Operation (2)
ADF sensor 2 within the time prescribed for the paper
length, this will trigger a jam.
55
OP-P1/MF1 Training