Key Function; Operation Procedures - Master V-100 User Manual

COMPUTER OPERATION FUNCTINAL BUTTONS:
SPECIFICATIONS:
TIME
DISTANCE
COUNT
TOTAL COUNT
CALORIES

KEY FUNCTION:

MODE: This key lets you to select each mode and lock on to a particular function you want.
RESET: The value to Zero by pressing the RESET key.

OPERATION PROCEDURES:

1. AUTO ON/OFF:
The system turns on when any key is depressed or when it sensor an input from the speed
sensor.
The system turns off automatically when the speed sensor has no signal input or no keys
are pressed for approximately 4 minutes.
User set values are maintained during power off and will be present except you replace
battery once.
BATTERY:
1. The monitor uses on "AA" or AG76 battery. You can replace the battery through the back
of the unit.
2. Battery must be correctly positioned and make sure the battery spring is properly contact
with battery.
3. If the display is illegible or only partial segment appeared. Please take out the battery and
wait for 15 seconds, then reinstall it.
00:00-99:59
0.00-999.9KM OR ML
0-9999
0-9999
0.0-9999KCAL
7
EN