Rear Board - Sony XVS-8000-C Service Manual

4-7.

Rear Board

Tip
This section describes the replacement procedure of NET-28 board. This replacement procedure applies to following
boards.
• CN-3807 board
• CNI-43 board
• CNO-43 board
• NET-28A board
Procedure
1. Remove the two screws, then remove the NET-28 board holding the handles.
Note
When installing the NET-28 board, insert making sure the board's upper and lower spring plates do not catch on
the board.
XVS-8000-C/XVS-8000
NET-28 board
PSW
3 x 6
Handle
PSW
3 x 6
Spring plate
Handle
NET-28 board
4-10