Sony XVS-8000-C Service Manual page 43

2. Remove the CN-3825 board.
(1) Open the four clampers, then release the four harnesses.
(2) Disconnect the four harnesses from the four connectors (CN001, CN02, CN003, CN004) on the CN-3825
board.
(3) Remove the three screws, then remove the CN-3825 board.
3. Install the removed parts by reversing the steps of removal.
XVS-8000-C/XVS-8000
PSW3 x 6
CN002
Clamper
CN001
Harness
Clamper
CN-3825 board
CN004
Clamper
CN003
Clamper
Harness
Harness
4-15