Front Panel - Sony XVS-8000-C Service Manual

4-2.

Front Panel

Procedure
1. Loosen the four screws (with drop-safe) and remove the front panel to the arrow.
Note
The front panel is connected to the unit by the harness. When removing the front panel, be careful not too pull the
harness.
2. Open the clamper.
3. Remove the harness from the clamper, and then remove the front panel.
Harness
Connector
Front panel
Screw
(with drop-safe)
4. Install the removed parts by reversing the steps of removal.
Note
When installing the front panel, pass the harness to the clamper.
XVS-8000-C/XVS-8000
Harness guide
Clamper
Precaution during installation
Harness guide
Harness
Clamper Connector
Connector
Harness
4-2