1-5-2.
Extension Board EX-1295
Procedure
1.
Remove the front panel. (Refer to
2.
Remove the XPT-38 board.
3.
Insert extension board EX-1295 into the slot from which the board was removed referring to the following figure.
Extension board
4.
Close the right and left EX levers in the arrow directions to securely lock the extension board.
5.
Insert the board removed in step 3 into the rail of the EX-1295 extension board, while the eject levers are opened
as shown in the illustration.
XVS-8000-C/XVS-8000
"4-2. Front
Panel")
EX lever
EX-1295
EX lever
1-12