Brush Roll And Chamber - Bissell CROSSWAVE PET User Manual

Brush Roll and Chamber

WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
3
With warm water, rinse your
Brush roll window and Brush
Roll.
TIP: Running your machine with a wet Brush Roll will help the Brush Roll dry
faster. The trigger should not be pressed.
NOTE: The Brush Roll is not dishwasher or automatic washing machine safe.
Please follow cleaning instructions.
6
Replace Brush Roll by inserting the Brush Roll
end into the right side of the foot. Then lock
the pull tab into place by pressing downward.
Grasp Brush roll
window at the
front and pull
upward to remove.
4
If your Brush Roll chamber
is dirty, clean with a rag or
towel.
2
5
Let your Brush Roll and
Brush roll window chamber
dry before reassembling.
7
Replace the Brush roll window by first lining
up both brush window tabs with the edges
of the foot. Then press the window back into
place until you hear a click.
Pull Brush Roll out
by grabbing the
Brush Roll tab and
pulling upward.
www.BISSELL.com
13