Bissell CROSSWAVE PET User Manual page 12

Dirty Water Tank (cont.)
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
9
If the inside area where the
tank sits is dirty, wipe it
clean with a rag or towel.
NOTE: Make sure to clean your Dirty Water Tank and let all components dry out
after each use to keep your product at its best.
12
Place Strainer back into
Dirty Water Tank.
12
www.BISSELL.com
10
Leave parts out to dry before
reassembling.
13
Once parts are dry,
reassemble and replace
the top of tank.
11
Place vacuum filter back
into the top of the tank.
14
Angle the tank back into
body of machine by insert-
ing bottom first. Then tilt the
top of the tank toward the
machine and push into place
until you hear a click.